what model Benz MC is that? year?
or...?

I have one of these I will sell you.

-Britain

Them's awfully big brakes if you want a 23mm m/c. They'll only slow you down.

big reds for this car

I have the box the one I put in the race car came in if you want to come by and get it? You could also pick up the CA Speedway video and a few other odds and end I have found you can have. Let me know.

the suspension is even juicier. no pics yet
I have been seduced by the dark side

sounds good John. ill call ya

from world member PCAR916"
Unless these have been superseded, I used these numbers for my 23mm master cylinder.

The (Mercedes Benz) Part number is 022.430.9301
The ATE part number is 03.2123-3402.3

You'll need the "blue" hose and 90 degree inlet pieces unless you already have them

fdhytjythj

When I installed mine, I had to make a new and longer rod section from the brake switch disk into the master cylinder itsself. The one that worked with a 17 or 19mm m/c was too short and the pedal had about 30% travel of free play. Hey that box looks familiar too??!!

yes. and the contents morphed as indicated by the part number on your box. Thank you

ya think that will work with this?