IPB

Welcome Guest ( Log In | Register )

 
 
Reply to this topicStart new topic
> B.R.A.G. Brake Upgrade Part 2
eric9144
post Mar 30 2011, 10:19 AM
Post #1


Member
**

Group: Validating
Posts: 65
Joined: August 4, 2008
From: San Diego, CA
Member No.: 16,377



Last week I received my brake kit from Brad Roberts AG...This is the conversion that allows use of a vented 911 disk, M Caliper (3" bolt spread) on the stock spindles and retaining the 4 lug bolt pattern for the stock wheels.

I've run the BMW caliper conversion for the past 7 or so years and really, they just don't cut it when used aggressively due to the solid stock rotors.

Will be picking up some new M Calipers in the next couple weeks and doing the conversion, possibly moving the BMW Calipers to the back, undecided on that.

Check them out... They are pretty cool!
Attached File  914Disk.JPG ( 254.48K ) Number of downloads: 53
Go to the top of the page
 
+Quote Post
jim_hoyland
post Apr 6 2011, 10:59 PM
Post #2


Senior Member
***

Group: Subscriber
Posts: 1,959
Joined: May 1, 2003
From: Sunset Beach, CA
Member No.: 643



I've been running the set up with the M calipers for about 2 years now. Really nice and clean. No problems
Go to the top of the page
 
+Quote Post
eric9144
post Apr 8 2011, 04:10 PM
Post #3


Member
**

Group: Validating
Posts: 65
Joined: August 4, 2008
From: San Diego, CA
Member No.: 16,377



I just picked these up from PMB Performance [ http://www.pmbperformance.com/catalog/item...552/6862358.htm ]

They are a M caliper bolt on replacement and are more like the S calipers--very lightweight...
Attached File  Brembo_AM.jpg ( 66.64K ) Number of downloads: 60

Now I have to find a set of 914/6 rear calipers to balance everything out and I should be good to go!

BTW, PMB rocks! Super helpful, friendly and fast shipping!
Go to the top of the page
 
+Quote Post
-JR-
post May 7 2011, 12:24 AM
Post #4


Life goes faster at 150MPH
**

Group: Members
Posts: 153
Joined: May 12, 2004
From: Victoria BC Canada
Member No.: 2,055



QUOTE (eric9144 @ Apr 8 2011, 01:10 PM) *
I just picked these up from PMB Performance [ http://www.pmbperformance.com/catalog/item...552/6862358.htm ]

They are a M caliper bolt on replacement and are more like the S calipers--very lightweight...
Attached File  Brembo_AM.jpg ( 66.64K ) Number of downloads: 60

Now I have to find a set of 914/6 rear calipers to balance everything out and I should be good to go!

BTW, PMB rocks! Super helpful, friendly and fast shipping!



Hmmm... Look exactly like the 964 rear calipers I picked up for my car.


(IMG:http://img.photobucket.com/albums/v211/spamhandyman/Porsche%20Parts/964calipers.jpg)
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

RSS Lo-Fi Version Time is now: January 17, 2019 - 10:44 PM