IPB

Welcome Guest ( Log In | Register )

 
 
Reply to this topicStart new topic
> Complete 914 1.7 engine, $250 OBO
Andy Somogyi
post Jun 20 2018, 04:50 PM
Post #1


Newbie
*

Group: Members
Posts: 1
Joined: May 27, 2018
Member No.: 33,379



This is a builder 1970 Porsche 914 1.7 engine. It's complete with injection, intake, electronics, ECU, etc..

I bought this engine a few months ago with the intention of building it for my 912, but decided to go a completely different route and swap in a different engine.

So, I need this engine gone.

It turns over by hand just fine, crankcase looks clean, cylinders are good.

I pulled it apart to check the condition, and everything looks good.

As long as you pay to ship, I'll assemble this all back together, load it on a pallet and get it out to you.

I'm open to any reasonable offer, something around $250, maybe less.

Here's a video of the short block turning over, you can see the crank assembly rotates nice and smooth.

Video of shortblock turning over by hand

(IMG:https://uploads.tapatalk-cdn.com/20180620/f40c9466da538224d30884bbef771e8c.jpg)

(IMG:http://forums.pelicanparts.com/uploads26/s_l16001527797295.jpg)

(IMG:http://forums.pelicanparts.com/uploads26/s_l1600_31527797295.jpg)


(IMG:http://forums.pelicanparts.com/uploads26/s_l1600_41527797295.jpg)

Go to the top of the page
 
+Quote Post
jswaim59
post Sep 22 2018, 10:26 AM
Post #2


Newbie
*

Group: Members
Posts: 3
Joined: November 9, 2017
Member No.: 31,739



QUOTE (Andy Somogyi @ Jun 20 2018, 04:50 PM) *
This is a builder 1970 Porsche 914 1.7 engine. It's complete with injection, intake, electronics, ECU, etc..

I bought this engine a few months ago with the intention of building it for my 912, but decided to go a completely different route and swap in a different engine.

So, I need this engine gone.

It turns over by hand just fine, crankcase looks clean, cylinders are good.

I pulled it apart to check the condition, and everything looks good.

As long as you pay to ship, I'll assemble this all back together, load it on a pallet and get it out to you.

I'm open to any reasonable offer, something around $250, maybe less.

Here's a video of the short block turning over, you can see the crank assembly rotates nice and smooth.

Video of shortblock turning over by hand

(IMG:https://uploads.tapatalk-cdn.com/20180620/f40c9466da538224d30884bbef771e8c.jpg)

(IMG:http://forums.pelicanparts.com/uploads26/s_l16001527797295.jpg)

(IMG:http://forums.pelicanparts.com/uploads26/s_l1600_31527797295.jpg)


(IMG:http://forums.pelicanparts.com/uploads26/s_l1600_41527797295.jpg)

Go to the top of the page
 
+Quote Post
jswaim59
post Sep 22 2018, 10:29 AM
Post #3


Newbie
*

Group: Members
Posts: 3
Joined: November 9, 2017
Member No.: 31,739



QUOTE (jswaim59 @ Sep 22 2018, 10:26 AM) *
QUOTE
This is a builder 1970 Porsche 914 1.7 engine. It's complete with injection, intake, electronics, ECU, etc..

I bought this engine a few months ago with the intention of building it for my 912, but decided to go a completely different route and swap in a different engine.

So, I need this engine gone.

It turns over by hand just fine, crankcase looks clean, cylinders are good.

I pulled it apart to check the condition, and everything looks good.

As long as you pay to ship, I'll assemble this all back together, load it on a pallet and get it out to you.

I'm open to any reasonable offer, something around $250, maybe less.

Here's a video of the short block turning over, you can see the crank assembly rotates nice and smooth.

Video of shortblock turning over by hand

(IMG:https://uploads.tapatalk-cdn.com/20180620/f40c9466da538224d30884bbef771e8c.jpg)

(IMG:http://forums.pelicanparts.com/uploads26/s_l16001527797295.jpg)

(IMG:http://forums.pelicanparts.com/uploads26/s_l1600_31527797295.jpg)


(IMG:http://forums.pelicanparts.com/uploads26/s_l1600_41527797295.jpg)

Is this engine still for sale?

Thanks

Joe

Go to the top of the page
 
+Quote Post
Yasha7fold
post Oct 26 2018, 07:13 AM
Post #4


Newbie
*

Group: Members
Posts: 4
Joined: October 19, 2018
Member No.: 34,139



Where are you located?
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

RSS Lo-Fi Version Time is now: May 26, 2019 - 08:30 PM